E-1170-N2P Main Features:
■ 145PSI/10bar High nitrogen pressure make the unit a fit for almost any size
automotive service facility **
■ Save 70% time than single tyre inflation
■ Converts up to 6 tyres to Nitrogen simultaneously at the touch of a button **
■ Fully automated, fully programmable, micro-processor controlled conversion
■ Suit for: Car, Light Truck, Bus
1. Generates nitrogen from your compressed air
2. 2 Pre-Filters
3. 118L/31.1gal (us) external nitrogen storage tank
4. Auto-start inflation
5. Automatic zero drift adjustment
6. Remain at last setting
7. Audible and visual end of the cycle signal indicators
8. Self-diagnostic features
9. Vandal resistant mechanical switches
10. Large backlight LCD display
11. 4 Nos.*8M/26ft standard hoses with single clip-on closed chuck
12. Comprehensive diagnostics and error reporting
13. Nitrogen purge and fill cycle (N2P)
14. Nitrogen purity test port
15. Adjustable over pressure setting (OPS)
16. Adjustable number of cycles
17. Adjustable lower purge pressure limit
18. 6 air outlets allow simultaneous inflation of up to 6 tyres
19. Auto Shut-Off
20. 1Nos. Nitrogen Outlet to connect the unit and your tyre inflation gun
■ 118L/31.1gal(us) tank can be customised to 2pcs 14.5L/3.8gal(us) tank
■ No need tank to inflate 8bar/116PSI/800kPa or below pressure tyre/s
E-1170-N2P Operation Steps:
1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose(s) to tyre valve stem(s).
3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.
FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button
for 2 seconds until the LCD screen shows “N2P”.
4. When unit “beeps” and the LCD screen flashes the target pressure, tyre
inflation is complete.