AC Service
Compressor
Diagnosis
Electric Cable
Gas Extraction
Lift
Service
Software Subscription
Spray Booth
Tools
Tyre Service
Showing 12 of 63 items

MAXT AIR Mod. MXH 1000 - 2000 E

0.00 SEK
VERSION WITH DRYER – Coaxial screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through electrically aired radiator – operating load and load, with timed shutdown – Delta-star starting – Electronic control card – Versions with air tank are equipped with a valve and tank linking line.

WERA

0.00 SEK
WERA - Tools

POWER LIFT HDL 6500 SST DG

0.00 SEK
The hydraulic 2-post lift Power Lift HDL 6500 SST DG with a load capacity of 6500 kg and equipped with double jointed arms is a lift with high lifting capacity and flexibility for the versatile automotive workshop, that serves all vehicle types, from smallest cars to large vans. The Power Lift HDL 6500 SST DG is equipped with Nussbaum's patented SST technology. With the symmetrical telescopic double jointed arms you can carry a wide range of vehicle sizes and weight classes from small cars such as Smart up to overlong vans such as Mercedes-Benz Sprinter and VW Crafter with long wheelbase lift. The arms are mounted on roller bearings for comfortable operation and are secured in the set position by a pneumatic locking mechanism. The Power Lift HDL 6500 SST DG offers absolute operating comfort with two operating units (one per column) and two independent hydraulic power packs and can be easily adapted to the needs of the workshop in terms of installation width and height during installation. The Power Lift HDL 6500 SST DG is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg . Load capacity: 6500 kg The easy-to-use double-joint arms on roller bearings reach all the support points specified by the vehicle manufacturers Two operating units, two hydraulic power packs Operating units with clear electronic display Installation width and height are flexible High safety: Mechanical locking at any lifting height Low maintenance (no ropes, no ratchets) Developed and manufactured in Germany Recommended by Mercedes-Benz (for similar lift HDL 2.65 SST DG MB) SST technology The Safety Star Technology (SST) monitors the synchronism of the two lifting columns to within a tenth of a millimeter. The mechanical interlock locks the support arms automatically at any lifting height when The lift stops. A safety nut on roller bearings slides along the cylinder and locks the lift automatically. By reducing the number of moving parts in the lift (no synchronous ropes, no safety latch) we have been able to reduce the maintenance effort of the Power Lift HDL 6500 SST DG and thus reduce the running costs in the long run. The two independent hydraulic power packs are safely and space-savingly integrated into the lift. The operating units each have a clearly arranged electronic display. The synchronisation of the two columns can be electronically controlled with the revolutionary SST system with an accuracy of tenths of a millimeter. The columns communicate via an electric cable, eliminating the need to lay hydraulic hoses between the columns. The connecting cable can either be attached to the floor or to the top of the lifting columns via a cable bridge. The columns and arms made of high-quality steel are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and then powder-coated [AttributeShortCode,attribute=Colour name,attributeid=3]. Your lift is thus protected against dirt and weather in the long term. The design, the workmanship and the integrated hydraulic units give the Power Lift HDL 6500 SST DG an elegant overall appearance that unobtrusively supports the professional appearance of your workshop.

Platinum

0.00 SEK
Large-scale booth, exclusive design and high performance thanks to the use of inverters with integrated PLC unit, direct fired burner, backward blade fans with directly coupled motors.

RGU.2671.Mobile

0.00 SEK
Automatic tire changer for mobile truck service (intensive use). Suitable for tubeless wheels. Self-centering 4-arm hydraulic chuck. 1-speed engine. Clockwise and anticlockwise rotation of the spindle. Universal tool. Hydraulic movement of the spindle arm (right-left). Hydraulic lifting of the spindle arm (up and down). Manual movement of the tool arm (left - right). Tool changer with manual lifting and rotation.

GRIP 34

0.00 SEK
• Rim clamping up to 34” • Automatic tire leverless system, for disassambling and reassambling • “Easy Access” extractable pedal box for quick service • Double arm/disk air operated bead breaker system • Reinforced chassis and tower • Patented ultra-quick wheel-clamping system, through cone and shaft with lock nut • Double rotation speed INVERTER system • Standard equipped with slide lift max capacity 80 kg • Bead pressing arm complete with self-storage function • Locking system for total stiff locking of horizontal and operating arm

AVL DITEST ADS 130D

0.00 SEK
The fully automatic ADS 130D uses innovative processes to assist both experienced vehicle technicians and beginners during climate control servicing. The automatic and manual servicing and diagnostics functions can be quickly and conveniently selected using the 15-inch touchscreen display. The automatic processes make it easier to replace climate control components in the vehicle, and as a result the entire servicing and repair procedure is reduced to a minimum. This saves you time, money and stress.

Scissor Lift For Wheel Alignment 4000 Kg / 5000 Kg Free Wheels Service

0.00 SEK
·Sliding rear plates with low level of friction, manual locking in centered position and circular movements in any direction. ·Full alignment platforms, with adjustable seats for all types of front turntables. ·Suspension systems and safety devices against wedges. ·Optional platform lighting kit. ·Safety system against obstacles in the descent. ·Hydraulic cylinder equipped with valve that regulates the speed of descent. ·Safety valve in the hydraulic unit in case of overpressure. ·24 V operating switches “Dead man” type, separate up / down switches, and general switch that can be padlocked. ·Upper limit switch. ·Control of the speed in the descent. ·Anti-crushing safety device when lowering the lift. To continue the descent, press the lower button again. During the whole descent the elevator will emit an acoustic signal.

RGU56E.XLA

0.00 SEK
Automatic tire changer for trucks, agriculture, earthmoving. Suitable for tubeless and tubeless tires. Self-centering 4-arm hydraulic chuck. 2-speed engine. Clockwise and anticlockwise rotation of the spindle. Universal tool. Spindle on fixed arm. Hydraulic lifting of the spindle arm (up and down). Hydraulic translation of tool holder arm (left - right). Tool changer with automatic lifting and manual rotation. Mobile remote control. Mobile roller ramp for easy wheel positioning.

High Raise Scissor Lift 4000 Kg / 4000 Kg / 5000 Kg

0.00 SEK
Load capacity 5000 Kg Platform width 665 mm Platform length 5030 mm Distance between platforms 820 mm Lifting Height 2160 mm Plataform design Sliding rear platforms and recesses for turning plates Minimum height 330 mm Motor 3 Phase 230-400V 50/60 Hz. 3 KW

High Raise Scissor Lift 4000 Kg / 4000 Kg / 5000 Kg

0.00 SEK
Load capacity 4000 Kg Platform width 665 mm Platform length 4500 mm Distance between platforms 820 mm Lifting Height 2160 mm Plataform design Sliding rear platforms and recesses for turning plates Minimum height 330 mm Motor 3 Phase 230-400V 50/60 Hz. 2.2 KW

Trolley hydraulic cranes

0.00 SEK
Technical and structural lay-out • Ground chrome-plated rod for top reliability over time. • Extendable arm in 4 working positions. • Revolving rear wheels to move it easily. • 360° revolving hook. • Lateral tie-rods. • Safety valve to avoid any possible overload. • Descent control device with a controlled speed. • One speed hydraulic pump (131 - 132). • Two speed hydraulic pump (133 - 134). • Rubber wheels (131 – 133). • Rubber and nylon wheels (132 – 134).

Hydraulic 4-Post Lift 4000 Kg / 5000 KgWith recesses for turning plates and play detector

0.00 SEK
· Electro-hydraulic lifting system operating over a simple effect cylinder. · Innovative design of columns without longitudinal welds. · Platform locking system operated automatically by electromagnets. · Automatic release of safety wedges by pushing DOWN button. · Movable scissor jacking beam available on order. · Smooth platforms. · Safety system against obstacles, cable breakdown or looseness. · Hydraulic cylinder with control valve of lowering speed. · Safety valve against overpressure of the hydraulic system. · Pushbuttons at 24V, type “dead man”.

RASE.TOP.3128 CE 230/50-60/1/INV

0.00 SEK
Super Automatic Lever-less Tire Changer. Suitable for Car, Vans, SUVs and Light Trucks wheels. Normal, RFT, UHP tires.. Self centering spindle with mechanical locking SMARTLOCK. Variable-speed Motor (Inverter). Double toolhead with automatic translation for mounting/demounting and bead breaking. Pedal inflation with manometer on control panel. Set of plastic protections for alloy rims. Lever for leverless. Removable foot pedals unit. Air lubricator (automatic). Grease container and brush. Inflation pressure limiter (4 bar). Wheel lifter (80 kg). Bead pressing help device. Bead breaking force 1227 kg. Rim max diam. 12-28". Max wheel diam 1200 mm (47"). Max wheel width 406 mm (16"). Noise < 70 dB (A).

Hydraulic 4-Post Lift 4000 Kg Wider For 3D Alignment

0.00 SEK
·Hydraulic 4 post lift 4 T Special Width 3D Alignment. ·100% Automatic (no air required). ·Electro-hydraulic lifting system operated by a single-acting cylinder. ·Innovative design of columns without longitudinal welds. ·System operated automatically by electromagnets. ·Automatic releasing of the safety wedges by pressing the “DOWN” button. ·Rear and front safety against vehicle slipping. ·Safety system against obstacles and breakage / loosening of cables. ·Hydraulic cylinder equipped with drop speed control valve. ·Safety valve against excess pressure of the hydraulic system. ·24 V maneuver pushbuttons, “Dead man” type.

Hydraulic Presses

0.00 SEK
PRESSE IDRAULICHE DA BANCO HYDRAULIC STAND PRESSES PRESSES HYDRAULIQUES D’ETABLI HYDRAULISCHE TISCHPRESSEN

Hydraulic 4-Post Lift 4000 Kg / 5000 Kg With recesses for turning plates and play detector

0.00 SEK
·Innovative design of columns without longitudinal welds ·Electro-hydraulic lifting system operated over a simple effect cylinder. ·Platform locking system operated automatically by electromagnets ·Safety system against obstacles, cable breakdown or looseness. ·Hidraulic cylinder with control valve of lowering speed. ·Safety valve against overpressure of the hydraulic system ·Pushbuttons at 24V. type “dead man”, separated UP & DOWN buttons and ON/OFF switch locable by a padlock. ·Special protection on pulleys zone ·Smooth platforms ·Upper height limit switch. ·Automatic release of safety wedges by pushing DOWN button

MAXT AIR Mod. MX 7500 - 150 DRIVEN

0.00 SEK
– Coaxial screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through electrically aired radiator – operating load and load, with timed shutdown – Delta-star starting – Electronic control card – Versions with air tank are equipped with a valve and tank linking line.

MAXT AIR Mod. MXP 4000 - 6000

0.00 SEK
– Coaxial screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through electrically aired radiator – operating load and load, with timed shutdown – Delta-star starting – Electronic control card – Versions with air tank are equipped with a valve and tank linking line.

MAXT AIR Mod. MXP 2200 - 3000

0.00 SEK
– Coaxial screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through electrically aired radiator – operating load and load, with timed shutdown – Delta-star starting – Electronic control card – Versions with air tank are equipped with a valve and tank linking line.

MAXT AIR Mod. MXH 1000 - 2000/500 E

0.00 SEK
VERSION WITH AIR TANK AND DRYER – Coaxial screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through electrically aired radiator – operating load and load, with timed shutdown – Delta-star starting – Electronic control card – Versions with air tank are equipped with a valve and tank linking line.

TITANIUM 6000

0.00 SEK
Spray booth made with high-quality components for reliable and long-lasting use. Available in either the standard version including gas or diesel burner (two stages), stainless steel heat exchanger and electromechanical control board or in the multi-accessory version to meet specific needs.

UNI LIFT 6500

0.00 SEK
The hydraulic scissor lift Uni Lift 6500 with a load capacity of 6500 kg is the best scissor lift for passenger cars, SUVs and vans. The wide range of work that can be done with the Uni Lift 6500 ranges from reception to underbody repairs and maintenance. The Uni Lift 6500 raises to a comfortable maximum height of 1877 mm and is flexible in installation width. The mechanical safety lock attached to the scissors guarantees perfect stability during wheel alignment. The Uni Lift 6500 can easily be retrofitted with the JAX 2000, JAX 2600 or JAX 3200 jacks, adapting to the development of your workshop for a long time to come. Lifting time: 40 seconds / lowering time 40 seconds Capacity: 6500 kg Lifting height of 1877 mm Mechanical safety lock guarantees perfect stability during wheel alignment Platforms up to 6000 mm length Flexible installation width Can be retrofitted with axle jacks 360° access Can also be installed flush with the floor Developed and manufactured in Germany Low-noise oil submerged motor The Uni Lift 6500 is equipped with a hydraulic synchronization control and a mechanical safety lock. The control unit of the Uni Lift 6500 is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The Uni Lift 6500 has no fixed connections between the platforms and can therefore be installed in different installation widths as required. The low power consumption and the low maintenance effort, also thanks to the reduced number of moving parts, reduce the running costs. The scissors and rails are welded in Nussbaum's own state-of-the-art welding machines, shot peened and then powder coated. Your lifting platform is thus protected against dirt and weather in the long term. Installation requirements Fundament gemäß gültigem Datenblatt, 12 Dübel (abhängig vom Fundament, siehe Prüfbuch), Hydrauliköl HLP ISO 32, Füllmenge ca. 17 Liter, Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss 6-10 bar, Entladung

UNI LIFT 5000 NT PLUS AMS

0.00 SEK
The hydraulic scissor lift Uni Lift 5000 NT Plus AMS with a lifting capacity of 5000 kg is such a versatile lift that it takes a central place in thousands of automotive service operations worldwide. The wide range of work that can be done with the Uni Lift 5000 NT Plus AMS ranges from wheel alignment, test technology, tyre service, check in inspection to underbody repairs and maintenance. Equipped with wheel alignment set and wheel free lift (RFH) The Uni Lift 5000 NT Plus AMS can literally be used anytime and anywhere. In addition, it has fast lifting and lowering times, requires little space thanks to the low rails and short ramps, lifts to a comfortable maximum height of 1970 mm and is flexible in its installation width. The wheel alignment set integrated into the rails of the lifting platform for precise wheel alignment consists of a sliding plate at the rear of the rails and recesses for turntables in the front. The mechanical safety ratchet attached to the scissors guarantees perfect stability during wheel alignment. The wheel-free lift allows free access to the wheels of the vehicle in no time at all. By simply changing a switch on the control column, the operator can switch between the lift of the wheel-free jack and the lift as a whole. The Uni Lift 5000 NT Plus AMS can easily be retrofitted with the axle lift JAX 2000, JAX 2600 or JAX 3200 and thus adapts to the development of your workshop for a long time to come. Lifting time: 35 Seconds / lowering time29 Seconds Capacity: 5000 kg Lifting height of 1970 mm Integrated wheel alignment set with sliding plates and recesses for turntables Fast lifting wheel free lift (RFH) for all work on tyres and wheels Mechanical lock guarantees perfect stability for testing Space-saving: Low rails and short drive-on ramps Flexible installation width Retrofittable with axle lifts 360° access Can also be installed flush with the floor: Uni Lift 5000 NT Developed and manufactured in Germany All Nussbaum hydraulic scissor lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum-s patented hydraulic technology NT. The NT technology controls the perfect synchronisation of the four cylinders of the NT system, which are driven in two independent, redundant hydraulic circuits by a powerful and low-noise suboil motor. The control unit of the Uni Lift 5000 NT Plus AMS is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The Uni Lift 5000 NT Plus AMS has no fixed connections between the platforms and can therefore be installed in different installation widths as required.

UNI LIFT 5000 NT AMS

0.00 SEK
The hydraulic scissor lift Uni Lift 5000 NT AMS with a lifting capacity of 5500 kg is the perfect lift for wheel alignment, testing, check-in inspection, diagnosis and repairs in the automotive workshop. With the fast lifting and lowering times, their small space requirement thanks to the low rails and the short ramps, their comfortable Lifting height of 1970 mm, the flexible installation width and the variable distance between the operating unit and the lifting platform, the Uni Lift 5000 NT AMS the perfect companion for every car repair shop that needs a lift that meets all requirements. The wheel alignment set integrated into the rails of the lifting platform for precise wheel alignment consists of a sliding plate at the rear of the rails and recesses for turntables in the front. The mechanical safety ratchet attached to the scissors guarantees perfect stability during wheel alignment. The Uni Lift 5000 NT AMS can easily be retrofitted with the axle lift JAX 2000, JAX 2600 or JAX 3200 and thus adapts to the development of your workshop for a long time to come. Lifting time: 35 Seconds / lowering time29 Seconds Capacity: 5500 kg Lifting height of 1970 mm Integrated wheel alignment set with sliding plates and recesses for turntables Mechanical lock guarantees perfect stability for testing Space-saving: Low rails and short drive-on ramps Flexible installation width, Distance between control unit and lift can be varied as required Retrofittable with axle lifts 360° access Can also be installed flush with the floor: Uni Lift 5000 NT AMS Unterflur Developed and manufactured in Germany All Nussbaum hydraulic scissor lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum-s patented hydraulic technology NT. The NT technology controls the perfect synchronisation of the four cylinders of the NT system, which are driven in two independent, redundant hydraulic circuits by a powerful and low-noise suboil motor. The control unit of the Uni Lift 5000 NT AMS is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The Uni Lift 5000 NT AMS has no fixed connections between the platforms and can therefore be installed in different installation widths as required. Would you like to install your scissor lift flush with the floor? Click here to go to the inground version: Uni Lift 5000 NT AMS Unterflur The low power consumption and low maintenance requirements, also thanks to the reduced number of moving parts, reduce running costs. The scissors and platforms are welded in Nussbaum's own state-of-the-art welding machines, shot-peened and then powder-coated Bleu Your lift is thus protected against dirt and weather in the long term.

UNI LIFT 3500 NT AMS

0.00 SEK
The hydraulic scissor lift Uni Lift 3500 NT AMS with a lifting capacity of 4000 kg is the perfect lift for wheel alignment, testing, check-in inspection, diagnosis and repairs in the automotive workshop. With the fast lifting and lowering times, their small space requirement thanks to the low rails and the short ramps, their comfortable Lifting height of 1970 mm, the flexible installation width and the variable distance between the operating unit and the lifting platform, the Uni Lift 3500 NT AMS the perfect companion for every car repair shop that needs a lift that meets all requirements. The wheel alignment set integrated into the rails of the lifting platform for precise wheel alignment consists of a sliding plate at the rear of the rails and recesses for turntables in the front. The mechanical safety ratchet attached to the scissors guarantees perfect stability during wheel alignment. The Uni Lift 3500 NT AMS can easily be retrofitted with the axle lift JAX 2000, JAX 2600 or JAX 3200 and thus adapts to the development of your workshop for a long time to come. Lifting time: 35 Seconds / lowering time29 Seconds Capacity: 4000 kg Lifting height of 1970 mm Integrated wheel alignment set with sliding plates and recesses for turntables Mechanical lock guarantees perfect stability for testing Space-saving: Low rails and short drive-on ramps Flexible installation width, Distance between control unit and lift can be varied as required Retrofittable with axle lifts 360° access Can also be installed flush with the floor: Uni Lift 3500 NT AMS Unterflur Developed and manufactured in Germany All Nussbaum hydraulic scissor lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum-s patented hydraulic technology NT. The NT technology controls the perfect synchronisation of the four cylinders of the NT system, which are driven in two independent, redundant hydraulic circuits by a powerful and low-noise suboil motor. The control unit of the Uni Lift 3500 NT AMS is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The Uni Lift 3500 NT AMS has no fixed connections between the platforms and can therefore be installed in different installation widths as required.

UNI LIFT 3500 NT PLUS

0.00 SEK
The hydraulic scissor lift Uni Lift 3500 NT Plus with a lifting capacity of 3500 kg is the perfect lift for pick-up inspection, diagnosis, tyre service and repairs in the car workshop. With the fast lifting and lowering times, their small space requirement thanks to the low rails and the short ramps, their comfortable Lifting height of 1920 mm, the flexible installation width and the integrated hydraulic wheel free jack (RFH) is The Uni Lift 3500 NT Plus The perfect equipment for the car repair shop that needs a lifting platform that can meet all the requirements of a modern service company. The wheel-free lift allows free access to the wheels of the vehicle in no time at all. By simply changing a switch on the control column, the operator can switch between the lift of the wheel-free jack and the lift as a whole. The Uni Lift 3500 NT Plus can easily be retrofitted with the axle lift JAX 2000, JAX 2600 or JAX 3200 and thus adapts to the development of your workshop for a long time to come. Lifting time: 35 Seconds / lowering time29 Seconds Capacity: 3500 kg Lifting height of 1920 mm Fast lifting wheel free lift (RFH) for all work on tyres and wheels Space-saving: Low rails and short drive-on ramps Flexible installation width, Distance between control unit and lift can be varied as required Retrofittable with axle lifts Two redundant hydraulic circuits with NT technology 360° access Can also be installed flush with the floor: Uni Lift NT Developed and manufactured in Germany All Nussbaum hydraulic scissor lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum-s patented hydraulic technology NT. The control unit of the Uni Lift 3500 NT Plus is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The Uni Lift 3500 NT Plus has no fixed connections between the platforms and can therefore be installed in different installation widths as required. Would you like to install your scissor lift flush with the floor?

COMBI LIFT 4.65 S AMS

0.00 SEK
The hydraulic 4-post lift COMBI LIFT 4.65 S AMS with a load capacity of 6500 kg is the perfect lift for wheel alignment, testing technology, dialogue acceptance, diagnosis and bodywork in the quality and price-conscious car repair shop, That serves all weight classes from passenger cars to vans, small trucks, up to motor homes.Even as a headlight adjusting place in conjunction with a headlight tester, it always delivers reliable results in headlight adjustment. For lower lying vehicles we offer optionally extended ramps with a length of 1600 mm. The wheel alignment set integrated in the runways of the lift for precise wheel alignment consists of a sliding plates at the back of the runways and recesses for the turntable in the front area. The COMBI LIFT 4.65 S AMS can be retrofitted at any time with LED lighting on the runways for even more working comfort, the JAX 2000, JAX 2600 and JAX 3200 axle lifters and thus adapts continuously to the development of your workshop. With the tried and tested Nussbaum hydraulics, the perfectly flat runways, the automatic safety lock every 100 mm by the automatic safety catch, the flexible rail distances, with the retrofittable lighting and optional accessories, the [ AttributeShortCode,attribute=Title]is the perfect companion for any automotive workshop that needs a reliable, low-cost lift that can meet all future requirements. Load capacity: 6500 kg Lifting height of mm Integrated wheel alignment set with sliding plates and recesses for turntable Perfectly leveled runways for wheel alignment and headlight adjustment Mechanical jack guarantees perfect stability for testing equipment Flexible distance between the runways, adjustable in 50 mm steps Short drive-on ramps with a length of only 1250 mm Can be retrofitted with axle jacks and lighting In-ground mounting for perfectly flat runways on request Guaranteed quality: each hydraulic cylinder is individually tested before shipment Developed and manufactured in Germany All Nussbaum 4-post hydraulic lifts are equipped as standard with a pulling hydraulic cylinder integrated in the runway: The pulling cylinder, driven by a powerful and low-noise submerged oil unit, protects the hydraulic system and guarantees the longevity of your lift. The lowering process requires no energy and thus reduces energy consumption and the running costs of the workshop. The runways and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot peened and then [AttributeShortCode,attribute=colour name,attributeid=3] powder-coated. Your lift is thus protected against dirt and weather in the long term.

COMBI LIFT 4.40 S AMS

0.00 SEK
The hydraulic 4-post lift Combi Lift 4.40 S AMS with a load capacity of 4500 kg is the perfect lift for wheel alignment, testing technology, dialogue acceptance, diagnosis and bodywork in the quality and price-conscious car repair shop.Even as a headlight adjusting place in conjunction with a headlight tester, it always delivers reliable results in headlight adjustment. For lower lying vehicles we offer optionally extended ramps with a length of 1600 mm. The wheel alignment set integrated in the runways of the lift for precise wheel alignment consists of a sliding plates at the back of the runways and recesses for the turntable in the front area. The Combi Lift 4.40 S AMS can be retrofitted at any time with LED lighting on the runways for even more working comfort, the JAX 2000, JAX 2600 and JAX 3200 axle lifters and thus adapts continuously to the development of your workshop. With the tried and tested Nussbaum hydraulics, the perfectly flat runways, the automatic safety lock every 100 mm by the automatic safety catch, the flexible rail distances, the Combi Lift 4.40 S AMS is the perfect companion for every car workshop, that needs a reliable, inexpensive lift, which is future-proof to all requirements. Load capacity: 4500 kg Lifting height of 2026 mm Integrated wheel alignment set with sliding plates and recesses for turntable Perfectly leveled runways for wheel alignment and headlight adjustment Mechanical jack guarantees perfect stability for testing equipment Flexible distance between the runways, adjustable in 50 mm steps Short drive-on ramps with a length of only 1250 mm Can be retrofitted with axle jacks and lighting In-ground mounting for perfectly flat runways on request Guaranteed quality: each hydraulic cylinder is individually tested before shipment Developed and manufactured in Germany All Nussbaum 4-post hydraulic lifts are equipped as standard with a pulling hydraulic cylinder integrated in the runway: The pulling cylinder, driven by a powerful and low-noise submerged oil unit, protects the hydraulic system and guarantees the longevity of your lift. The lowering process requires no energy and thus reduces energy consumption and the running costs of the workshop. The runways and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot peened and then [AttributeShortCode,attribute=colour name,attributeid=3] powder-coated. Your lift is thus protected against dirt and weather in the long term.

POWER LIFT HDL 7000 SST DG

0.00 SEK
The hydraulic 2-post lift Power Lift HDL 7000 SST DG with a load capacity of 7000 kg and equipped with double jointed arms is a lift with high lifting capacity and flexibility for the versatile automotive workshop, that serves all vehicle types, from smallest cars to large vans. The Power Lift HDL 7000 SST DG is equipped with Nussbaum's patented SST technology. With the symmetrical telescopic double jointed arms you can carry a wide range of vehicle sizes and weight classes from small cars such as Smart up to overlong vans such as Mercedes-Benz Sprinter and VW Crafter with long wheelbase lift. The arms are mounted on roller bearings for comfortable operation and are secured in the set position by a pneumatic locking mechanism. The Power Lift HDL 7000 SST DG offers absolute operating comfort with two operating units (one per column) and two independent hydraulic power packs and can be easily adapted to the needs of the workshop in terms of installation width and height during installation. The Power Lift HDL 7000 SST DG is developed and produced by Nussbaum in Kehl-Bodersweier in Baden-Württemberg . Load capacity: 7000 kg The easy-to-use double-joint arms on roller bearings reach all the support points specified by the vehicle manufacturers Two operating units, two hydraulic power packs Operating units with clear electronic display Installation width and height are flexible High safety: Mechanical locking at any lifting height Low maintenance (no ropes, no ratchets) Developed and manufactured in Germany Recommended by Mercedes-Benz (for similar lift HDL 2.65 SST DG MB) SST technology The Safety Star Technology (SST) monitors the synchronism of the two lifting columns to within a tenth of a millimeter. The mechanical interlock locks the support arms automatically at any lifting height when The lift stops. A safety nut on roller bearings slides along the cylinder and locks the lift automatically. By reducing the number of moving parts in the lift (no synchronous ropes, no safety latch) we have been able to reduce the maintenance effort of the Power Lift HDL 7000 SST DG and thus reduce the running costs in the long run. The two independent hydraulic power packs are safely and space-savingly integrated into the lift. The operating units each have a clearly arranged electronic display. The synchronisation of the two columns can be electronically controlled with the revolutionary SST system with an accuracy of tenths of a millimeter. The columns communicate via an electric cable, eliminating the need to lay hydraulic hoses between the columns. The connecting cable can either be attached to the floor or to the top of the lifting columns via a cable bridge. The columns and arms made of high-quality steel are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and then powder-coated [AttributeShortCode,attribute=Colour name,attributeid=3]. Your lift is thus protected against dirt and weather in the long term. The design, the workmanship and the integrated hydraulic units give the Power Lift HDL 7000 SST DG an elegant overall appearance that unobtrusively supports the professional appearance of your workshop.

UFK80-CT 1S PAV

0.00 SEK
Vertical electro-hidraulic lift for wheel alignment. Ready for Wheel Alignment (c/w turntable recess, rear slipping tables). Surface mount. One way access. Lifting capacity 8.5 tons (17636 lbs). Car max lifting height 1950 mm. Lift min stand height 260 mm. Total width 2350 mm. Total length 7000 mm. Lifting Time 35 s (adjustable). Lowering Time: 35 s (adjustable).

UFK55-CT-LT 1S PAV 5200mm

0.00 SEK
Vertical electro-hidraulic lift for wheel alignment. Ready for Wheel Alignment (c/w turntable recess, rear slipping tables). Surface mount. One way access. Lift Tables. Lifting capacity 5.5 tons (12125 lbs). Car max lifting height 2055 mm. Lift min stand height 290 mm. Total width 2220 mm. Total length 6600 mm. Lifting Time 70 s (adjustable). Lowering Time: 70 s (adjustable).

UST40-CT-LT PAV

0.00 SEK
Scissor lift for wheel alignment. Ready for Wheel Alignment (c/w turntable recess, rear slipping tables). Surface mount. One way access. Lift Tables. Lifting capacity 4 tons (8818 lbs). Car max lifting height 1960 mm. Lift min stand height 180 mm. Total width 2200 mm. Platform length 5260 mm. Total length 5480 mm. Lifting Time 50 s (adjustable). Lowering Time: 50 s (adjustable).

NoContact.VNPH

0.00 SEK
PC-based wheel aligner. Deluxe Trolley. Monitor LCD 27". WinXP / Win7 Operating System. MAXI level wheel alignment software. Databank upgradable via internet. Guided wheel alignment procedure with 3d animations. Toe-curve adjustment program. Colour printer. USB interface. Touchless measuring system. 4 infrared cameras. Robot positioning system for cameras. 4,5m rails for camera system. Passive reflection markers to be applied on tire wall. Wired transmission system. Cabling integrated on rails. Heavy duty turntables (1000kg). Remote control. Steering lock. Brake pedal depressor

VCO-K.Eco.AV6-BT.G2.CPS

0.00 SEK
PC-based wheel aligner. Suitable for Trucks / Bus wheels. Standard Trolley. Monitor LCD 17". WinXP / Win7 Operating System. Databank upgradable via internet. Colour printer. USB interface. 6 sensors measuring system. 4 AV6 infrared sensors (bluetooth trasmission). Integrated battery charger. Self-centering 3-points clampers. Heavy duty truck turntables (max load 3500 kg). Remote control. Steering lock. Brake pedal depressor.

VCO-K2.WinTrax.N.VAPH

0.00 SEK
PC-based wheel aligner. Suitable for Car, Vans, SUVs and Light Trucks wheels. Deluxe Trolley. Not including PC, monitor, printer. WinXP / Win7 Operating System. MAXI level wheel alignment software. Databank upgradable via internet. Guided wheel alignment procedure with 3d animations. USB interface. FASEP measuring system. 4 WinTRAX2 infrared sensors (radio trasmission, multilink system, accelerometer for electronic level control). Integrated battery charger. Contact clamps. Run Out compensation not required. Electronic track gauge. Heavy duty turntables (1000kg). Remote control. Steering lock. Brake pedal depressor.

MAXT AIR Mod. MXP 750 - 1500

0.00 SEK
VERSION WITH DRYER – Coaxial screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through electrically aired radiator – operating load and load, with timed shutdown – Delta-star starting – Electronic control card – Versions with air tank are equipped with a valve and tank linking line.

MAXT AIR Mod. MXP 750 - 1500

0.00 SEK
– Coaxial screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through electrically aired radiator – operating load and load, with timed shutdown – Delta-star starting – Electronic control card – Versions with air tank are equipped with a valve and tank linking line.

MAXT AIR MOD. MX 750 - 2000/270 E

0.00 SEK
VERSION WITH AIR TANK AND DRYER – Coaxial screw compressor – Coaxial drive – Electric engine directly linked to the screw unit: allows better yield – Oil separator filter SPIN-ON – Oil filter SPIN-ON – Oil/air cooling through electrically aired radiator – operating load and load, with timed shutdown – Delta-star starting – Electronic control card – Versions with air tank are equipped with a valve and tank linking line.

SM-47-4054PL

0.00 SEK
1" Impact Wrench with Twin Hammer Clutch 5,500 RPM with 6" Ext. Anvil Max. Torque: 1,500 Ft-lbs (2,034 Nm)

SM-47-4054P

0.00 SEK
1" Impact Wrench with Twin Hammer Clutch 5,500 RPM Max. Torque: 1,500 Ft-lbs (2,034 Nm)

SM-43-4010

0.00 SEK
1/2" Angle Impact Wrench with Jumbo Hammer 8,500 RPM Handle Exhaust Max. Torque: 240 Ft-lbs (325 Nm)

High Pressure Nitrogen Generator and Conversion System for 6 Tyres Simultaneous Inflation

0.00 SEK
E-1170-N2P Main Features: ■ 145PSI/10bar High nitrogen pressure make the unit a fit for almost any size automotive service facility ** ■ Save 70% time than single tyre inflation ■ Converts up to 6 tyres to Nitrogen simultaneously at the touch of a button ** ■ Fully automated, fully programmable, micro-processor controlled conversion system ■ Suit for: Car, Light Truck, Bus E-1170-N2P Specifications: 1. Generates nitrogen from your compressed air 2. 2 Pre-Filters 3. 118L/31.1gal (us) external nitrogen storage tank 4. Auto-start inflation 5. Automatic zero drift adjustment 6. Remain at last setting 7. Audible and visual end of the cycle signal indicators 8. Self-diagnostic features 9. Vandal resistant mechanical switches 10. Large backlight LCD display 11. 4 Nos.*8M/26ft standard hoses with single clip-on closed chuck 12. Comprehensive diagnostics and error reporting 13. Nitrogen purge and fill cycle (N2P) 14. Nitrogen purity test port 15. Adjustable over pressure setting (OPS) 16. Adjustable number of cycles 17. Adjustable lower purge pressure limit 18. 6 air outlets allow simultaneous inflation of up to 6 tyres 19. Auto Shut-Off 20. 1Nos. Nitrogen Outlet to connect the unit and your tyre inflation gun 21.Options available: ■ 118L/31.1gal(us) tank can be customised to 2pcs 14.5L/3.8gal(us) tank ■ No need tank to inflate 8bar/116PSI/800kPa or below pressure tyre/s E-1170-N2P Operation Steps: 1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure. 2. Connect air hose(s) to tyre valve stem(s). 3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once. FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button for 2 seconds until the LCD screen shows “N2P”. 4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.

SG3

0.00 SEK
SET CLAWS +3" (!TS)

AVL DITEST ADS 130

0.00 SEK
The fully automatic ADS 130 supports both experienced automotive technicians and beginners in air conditioning service with its innovative processes. The automatic and manual service functions as well as diagnostic functions can be selected quickly and easily via the 15-inch touch display. The exchange of air conditioning components in the vehicle is facilitated by automatic processes which reduce the entire service and repair process to a minimum. This saves time, money and nerves.

AVL DITEST ADS 310

0.00 SEK
CO2 air conditioning system (R744) is superior to the current R1234yf system in terms of efficiency, cooling dynamics and environmental sustainability. Reputable automotive manufacturers have recognised its potential and will in future be putting their faith in CO2, the natural, ecological and advanced coolant. AVL DITEST is supporting the automotive industry with unique, state-of-the-art innovations. Together, we have developed the ADS 310 air conditioning service device so that for the first time, garage workshops are also able to carry out repairs and maintenance on CO2 air conditioning systems. Safety, environmental protection and economic efficiency were, of course, at the forefront of the development programme for the device.

AVL DITEST ADS 110

0.00 SEK
The most striking feature of the AVL DiTEST ADS 110 is arguably its compactness. Despite or perhaps because of its small size, it is ideally suited to workshop conditions. Available for both the R134a and the R1234yf, this entry-level model is impressively simple and intuitive to use via a keypad and the cursor navigation. In other words, the AVL DiTEST ADS 110 is your reliable colleague in the workshop.

GOLD

0.00 SEK
Booth with electric radiant panels heating. Heat transmission through radiation also improves the quality of the drying, hence reducing work time and running costs.

RGU300.ECO

0.00 SEK
Universal truck tire changer (commercial) is a professional unit, designed for tire service shops with heavy work load of commercial trucks wheels (up to 30").

RASE.TOP.2132

0.00 SEK
Super Automatic Leverless up to 27" RASE.TOP.2132 is a super automatic tire changer, designed for tire specialists, needful for oversize and racing tires. RASE.TOP.2132 encloses the simplicity and practicality of traditional tire changers with practicality of use on Run-Flat tires of new machine with Leverless, with reasonable cost.

SM-41-4012P

0.00 SEK
3/8" Impact Wrench with Twin Hammer Clutch 11,000 RPM Max. Torque: 430 Ft-lbs (583 Nm)

RGU56E.XL

0.00 SEK
Universal Tire Changer for trucks, agriculture and earth-moving wheels is a professional unit, designed for tire service shops with heavy work load of commercial / agriculture / earth-moving wheels up to 44" (56" optionally).

Contact Us

Get in touch

Your message has been sent. We'll get back to you soon!

There was a problem with your submission. Please repeat it again.

You're now subscribed, thank you!

Subscribe error, please review your email address.